HP 3000 Emulation, Migration and Replacement
Have you wished that you could transparently replace your legacy HP 3000 systems with industry-standard hardware while keeping your MPE applications as-is?
Are you concerned about the reliability of your existing hardware? The expense of maintaining it?
Would you like to get significantly improved performance from both the system and the network?
Do you need a disaster recovery solution for your existing HP 3000 systems without having to buy used hardware on eBay?
Do you need to increase the capacity of your existing system to handle your growing business?
If so, we have the solution for you! Software emulation of the HP 3000 system hardware allows you to use industry-standard servers as a drop-in replacement for your HP3000 servers and workstations. From the perspective of your application software, and even the operating system, there is no change. No porting. No application replacement. No user re-training.
Quayle Consulting Inc. (QCI) uses the state-of-the-art Charon-HPA emulation software from Stromasys to provide a modern replacement for your HP 3000 hardware.
Beginning with a free consultation, we will work with you from start to finish to provide an integrated solution that fits your needs with minimal disruption to your daily operations.
Why Emulate Your HP 3000 System?
The legacy HP 3000 hardware presents several issues. Let's see how emulation addresses some of the most common:
Failure rates increase as the hardware ages, especially for mechanical components such as disks, tapes, and fans. Replacement parts are increasingly difficult to locate and may be unreliable. Disk and tape failures present a risk of loss of business-critical data.
Charon HP 3000 emulation runs on modern industry-standard hardware that is reliable as well as fast and inexpensive to maintain. Storage subsystems have greater redundancy. Backups can be saved on network disk storage instead of tape.
- Hardware Footprint
The large footprint of these systems is increasingly more challenging to accommodate in modern data centers.
Charon-HPA runs on the same hardware as the rest of your data center, including blade servers and VMware virtual machines – and even in the cloud.
- Operating Expense
The legacy hardware requires large amounts of power and cooling. The cost of hardware maintenance and replacement parts is soaring.
With Charon emulation, the hardware maintenance costs are comparable with other servers.
The HP 3000 hardware is several decades old. The CPU, disks, and network are slow compared to modern equivalents.
Running Charon-HPA on an industry-standard server, most users will experience significant performance improvement. Network transfers alone may be up to 10x faster than on the legacy HP 3000.
- Modernization Cost
The alternatives to emulating your HP 3000 system hardware include porting your existing applications to a new hardware architecture or migrating your business processes to new applications. Both of these are expensive, time-consuming, and risky.
With Charon emulation, you keep using the same operating system and applications; the code and data are copied from your current system to the new virtual HP 3000. There is no need to re-train users, who may not even be aware there was a change – unless they notice the system is running faster! The implementation time can be a matter of days and is often mainly driven by the testing requirements.
Because there are no software changes, the need to re-validate regulated systems can be eliminated or reduced.
- Expansion Capabilities
It may not be possible or feasible to add new HP 3000 systems for business continuity/disaster recovery purposes or to add capacity as your business expands: hardware may not be available or may be too expensive, the data center may not allow adding more legacy hardware, or you may be required to run in the cloud.
Because Charon runs on the same hardware as the rest of your data center, these are not issues for an emulated HP 3000 system. You can even run Charon-HPA on a laptop system if portability is desired.
- Server Downsizing
When applications are migrated to other platforms, it may be necessary to maintain the original platform to access historical data for regulatory requirements, such as Sarbanes-Oxley (SOX) and FDA, or customer support purposes that do not require large servers.
With Charon-HPA you can create a much smaller virtual system to access the legacy data. The savings in operating costs may pay for the emulated system in a short time.
How Does HP 3000 Emulation Work?
Charon-HPA runs on industry-standard servers as an application under Linux (Red Hat 7.x or CentOS 7.x).
Charon-HPA can run on physical hardware (e.g., tower, blade, laptop), a virtual machine, or in the cloud.
The Charon-HPA software emulates the hardware present on your legacy system (CPU, memory, disks, tapes, network, serial devices) and translates the operations to utilize the host system resources.
Software licenses for the operating system, layered products, and many third-party applications can be transferred directly to the virtual HP 3000 system.
The virtual HP 3000 system may utilize local, network, or SAN storage on the host server.
As one of a handful of authorized Charon resellers positioned around the globe, Quayle Consulting Inc. offers full Charon HP 3000 integration services to keep your most critical system up and running – now, and well into the future.
Let us help you design and develop a faster, more reliable system using HP 3000 Emulation TODAY!